Avaya WLAN 8100 Series Reference page 286

ACLI Reference for wired networks
ip dhcp-relay clear-counters
Directed broadcasts configuration using CLI
The following sections describe procedures you can use to configure and display the status of
directed broadcasts using the CLI.
Related topics:
Configuring directed broadcasts
Displaying the directed broadcast configuration
Configuring directed broadcasts
About this task
Use this procedure to enable directed broadcasts on the switch. By default, directed broadcasts
are disabled.
Prerequisites
• Enable IP routing globally.
• Enable IP routing and configure an IP address on the VLAN to be configured as a
broadcast interface.
• Ensure that a route (local or static) to the destination address is available on the switch.
Procedure
To enable directed broadcasts, enter the following from the Global Configuration mode:
ip directed-broadcast enable
Displaying the directed broadcast configuration
About this task
Use this procedure to display the status of directed broadcasts on the switch. By default,
directed broadcasts are disabled.
Procedure
To display directed broadcast status, enter the following from the User EXEC mode:
show ip directed-broadcast
286 Avaya WLAN 8100 CLI Reference
on page 286
on page 286
Comments? infodev@avaya.com
August 2013