Avaya WLAN 8100 Series Reference page 219

The syntax for the snmp-server view command is:
snmp-server view <view-name> <OID> [<OID> {<OID> [<OID> [<OID> [<OID>
[<OID> [<OID> [<OID> [<OID>]]]]]]]]]
The snmp-server view command is executed in the Global Configuration mode.
The following table describes the parameters for this command.
Table 61: snmp-server view command parameters
viewname
OID
no snmp-server view command
The no snmp-server view command deletes the specified view.
The syntax for the no snmp-server view is:
no snmp-server view <viewname>
The no snmp-server view is executed in the Global Configuration mode.
The following table describes the parameters for this command.
Avaya WLAN 8100 CLI Reference
Parameters Description
Specifies the name of the new view; enter an
alphanumeric string.
Specifies Object identifier. OID can be entered as
a dotted form OID. Each OID must be preceded by
a + or - sign (if this is omitted, a + sign is implied).
The + is not optional.
For the dotted form, a sub-identifier can be an
asterisk, indicating a wildcard. Here are some
examples of valid OID parameters:
• sysName
• +sysName
• -sysName
• +sysName.0
• +ifIndex.1
• -ifEntry..1 (this matches all objects in the ifTable
with an instance of 1; that is, the entry for interface
#1)
• 1.3.6.1.2.1.1.1.0 (the dotted form of sysDescr)
The + or - indicates whether the specified OID is
included in or excluded from, the set of MIB objects
accessible using this view.
There are 10 possible OID values.
ACLI reference for wired networks
August 2013 219