Avaya WLAN 8100 Series Reference page 70

ACLI reference for Wireless LAN (WLAN) 8100
10. Use the following commands to view client QoS bandwidth for uplink and downlink
70 Avaya WLAN 8100 CLI Reference
Sample Output:
WCP8180#sh wireless diffserv statistics detail
Client (MAC=00:05:03:01:00:01)
Direction: Uplink
ClassifierBlock Name
--------------------------------------------
c1
Client (MAC=00:05:03:01:00:01)
Direction: Downlink
ClassifierBlock Name
--------------------------------------------
c1
Client (MAC=00:05:03:02:00:01)
Direction: Uplink
ClassifierBlock Name
--------------------------------------------
c1
Client (MAC=00:05:03:02:00:01)
Direction: Downlink
ClassifierBlock Name
--------------------------------------------
c1
WCP8180#
traffic between APs and clients.
Important:
The displayed client QoS bandwidth represents the actual bandwidth rate in use
for the client, which may differ from the configured value because the AP rounds
off the value down to the nearest 64000 bps. This is independent of the type of
client authentication.
For example, if the configured bandwidth rate for the client is 4294967295 bps
(configured in either the network profile or as part of RADIUS authentication), the
actual value displayed when you execute show wireless client qos
status is 4294912000 bps, which is the nearest multiple of 64000.
C8180#show wireless client qos status
Client Mac Address: cc:52:af:0e:c6:81
QoS Operational Status: Enabled
QoS Bandwidth limit:
Diffserv Policy Name:
WC8180#
WC8180#show wireless client qos cached-status
Client Mac Address: cc:52:af:0e:c6:81
QoS Bandwidth limit:
Comments? infodev@avaya.com
Policy: p1
Hits
11280
Policy: p1
Hits
0
Policy: p1
Hits
0
Policy: p1
Hits
0
Client to AP(Ingress) AP to Client(Egress)
--------------------- --------------------
64000
None
Client to AP(Ingress) AP to Client(Egress)
--------------------- --------------------
40000
64000
None
40000
August 2013