Avaya WLAN 8100 Series Reference page 252

ACLI Reference for wired networks
Procedure
To enable a Spanning Tree Group, use the following command from Global
Configuration mode.
spanning-tree stg <1-8> enable
About this task
Use the following procedure to disable a Spanning Tree Group.
Procedure
To disable a Spanning tree Group, use the following command from Global
Configuration mode.
spanning-tree stp <1-8> disable
About this task
Use the following procedure to set STP values by STG.
Procedure
To configure STP values, use the following command from Global Configuration
mode.
spanning-tree [stp <1-8>] [forward-time <4-30>] [hello-time
<1-10>] [max-age <6-40> [priority {0*0000 | 0*1000| 0*2000 |
0*3000 | ... | 0*E000 | 0*F000}] [tagged-bpdu {enable |
disable}] [tagged-bpdu-vid >1-4094>] [multicast-address
<H.H.H>] [add-vlan] [remove-vlan]
Variable Definitions
stp <1-8>
forward-time <4-30>
hello-time <1-10>
252 Avaya WLAN 8100 CLI Reference
Disabling a Spanning Tree Group
Configuring STP values
Variable
Comments? infodev@avaya.com
Value
Specifies the Spanning Tree Group; enter
the STG ID.
Enter the forward time of the STG in
seconds; the range is 4 -- 30, and the default
value is 15.
Enter the hello time of the STG in seconds;
the range is 1 --10, and the default value is
2.
August 2013