Avaya WLAN 8100 Series Reference page 306

ACLI Reference for wired networks
Procedure
Assign ports to an access list by using the following command in Global Configuration
mode.
qos acl-assign port <port_list> acl-type {ip | l2} name <name>
Variable Definitions
Variable
port <port_list>
acl-type {ip | l2}
name <name>
Removing an access list assignment
About this task
Remove an access list assignment by performing this procedure.
Procedure
Remove an access list assignment by using the following command from Global
Configuration mode.
no qos acl-assign <aclassignid>
Creating an IP access list
About this task
Create an IP access list by performing this procedure.
Procedure
Create an access list by using the following procedure from Global Configuration
mode.
qos ip-acl name <name> [addr-type <addrtype>] [src-ip
<source_ip>] [dst-ip <destination_ip>] [ds-field <dscp>]
[{protocol <protocol_type> | next_header <header>}] [src-port-
min <port> src-port-max <port>] [dst-port-min <port> dst-port-
max <port>] [flow-id <flowid>] [drop-action {drop | pass}]
306 Avaya WLAN 8100 CLI Reference
Specifies the list of ports assigned to the specified access list.
Specifies the type of access list used; IP or Layer 2.
Specifies the name of the access list to be used. Access lists
must be configured before ports can be assigned to them.
Comments? infodev@avaya.com
Value
August 2013