Auto-Rf - Avaya WLAN 8100 Series Reference

Auto-RF

The following sections describe the configuration and management of the Automatic Radio
Frequency (Auto-RF) feature, using the ACLI.
Related topics:
Configuring Auto-RF
Managing Auto-RF operations
Viewing Auto-RF configuration and status
Configuring Auto-RF
Configure Auto-RF to perform automatic channel assignment or power selection for access
points (AP) in a mobility domain.
Note:
In the current release, Auto-RF is enabled by default.
About this task
ACLI reference:
WCP8180(config-wireless)#auto-rf ?
Configure auto-rf settings
channel-plan
power-plan
WCP8180(config-wireless)#auto-rf
Auto-RF channel plan configuration
Configure the Auto-RF channel plan for the a-n and the bg-n radio frequency bands: .
WC8180(config-wireless)#auto-rf channel-plan ?
a-n 802.11 a/n radio frequency band
bg-n 802.11 bg/n radio frequency band
WC8180(config-wireless)#auto-rf channel-plan a-n ?
history-depth
interval
mode
time
WC8180(config-wireless)#
WC8180(config-wireless)#auto-rf channel-plan bg-n ?
history-depth
interval
mode
time
WC8180(config-wireless)#
Avaya WLAN 8100 CLI Reference
on page 53
on page 57
Configure auto-rf channel plan settings
Configure auto-rf power plan settings
Set channel plan history depth
Set interval used for "interval" plan mode
Set channel plan mode
Set time used for "time" plan mode
Set channel plan history depth
Set interval used for "interval" plan mode
Set channel plan mode
Set time used for "time" plan mode
ACLI reference for the Wireless LAN (WLAN) 8100
on page 58
August 2013 53