Avaya WLAN 8100 Series Reference page 326

ACLI Reference for wired networks
Procedure
1. Configure priority values by using the following command from Global Configuration
2. View the priority values by using the following command:
Example
WCP8180(config)#show qos queue-set-assignment queue-set 1
Queue Set 1
802.1p Priority Queue
_______________ _____
0
1
2
3
4
5
6
7
Variable
queue-set <1-56>
1p <0-7>
queue <1-8>
Configuring QoS Interface Groups
Use the CLI commands in this section to add or delete ports to or from an interface group, or
add or delete the interface groups themselves.
Related topics:
Configuring ports for an interface group
Removing ports from an interface group
Creating an interface group
Removing an interface group
326 Avaya WLAN 8100 CLI Reference
mode.
qos queue-set-assignment queue-set <1-56> 1p <0-7> queue
<1-8>
show qos queue-set-assignment queue-set
1
1
1
1
1
1
1
1
Variable Definitions
Specifies the queue-set, value ranges from 1–56.
Specifies the 802.1p priority value for which the queue
association is being modified; value ranges from 0–7.
Specifies the queue within the identified queue set to assign the
802.1p priority traffic at egress, value ranges from 1–8.
on page 327
on page 328
Comments? infodev@avaya.com
Value
on page 327
on page 327
August 2013