Avaya WLAN 8100 Series Reference page 221

show snmp-server notification-control
The show snmp-server notification-control command shows the current state of
the applicable notifications.
The syntax for the show snmp-server notification-control command is
show snmp-server notification-control
The show snmp-server notification-control command executes in any mode.
snmp-server notification-control command
The snmp-server notification-control command enables the notification identified
by the command parameter. The notification options are:
• DHCP Snooping: bsDhcpSnoopingBindingTableFull, bsDhcpSnoopingTrap
• Dynamic ARP Inspection: bsaiArpPacketDroppedOnUntrustedPort
• IP Source Guard: bsSourceGuardReachedMaxIpEntries,
bsSourceGuardCannotEnablePort
The syntax for the snmp-server notification-control command is
snmp-server notification-control <WORD/1-128>
The snmp-server notification-control command executes in Global Configuration
mode.
The following table describes the parameters for this command.
Table 64: snmp-server notification-control command parameters
<WORD/1-128>
no snmp-server notification-control
The no snmp-server notification-control command disables the notification
identified by the command parameter. The notification options are:
• DHCP Snooping: bsDhcpSnoopingBindingTableFull, bsDhcpSnoopingTrap
• Dynamic ARP Inspection: bsaiArpPacketDroppedOnUntrustedPort
• IP Source Guard: bsSourceGuardReachedMaxIpEntries,
bsSourceGuardCannotEnablePort
The syntax for the no snmp-server notification-control command is
no snmp-server notification-control <WORD/1-128>
The no snmp-server notification-control command executes in Global
Configuration mode.
The following table describes the parameters for this command.
Avaya WLAN 8100 CLI Reference
Parameter
Can either be the English description or the OID of a
supported notification type.
ACLI reference for wired networks
Description
August 2013 221