Avaya WLAN 8100 Series Reference page 299

Displaying IGMP group membership information
About this task
Display the IGMP group information to show the learned multicast groups and the attached
ports.
Procedure
To display IGMP group information, enter:
show ip igmp group [count] [group <A.B.C.D>] [member-
subnet<A.B.C.D>/<0-32>]
OR
Enter:
show vlan multicast membership <Vlan ID>
count
group <A.B.C.D>
member-subnet <A.B.C.D>/<0-32
The following table shows the field descriptions for the show ip igmp group command.
Group Address
VLAN
Member Address
Expiration
Type
In Port
Avaya WLAN 8100 CLI Reference
Variable Definitions
Variable
Job aid
Field
Indicates the multicast group address.
Indicates the VLAN interface on which the group exists.
Indicates the IP address of the IGMP receiver (host or
IGMP reporter). The IP address is 0.0.0.0 if the type is
static.
Indicates the time left before the group report expires. This
variable is updated upon receiving a group report.
Specifies the type of membership: static or dynamic.
Identifies the member port for the group. This is the port on
which group traffic is forwarded and in those case where
the type is dynamic, it is the port on which the IGMP join
was received.
ACLI reference for wired networks
Value
Displays the number of IGMP group
entries.
Displays group information for the specified
group.
Displays group information for the specified
member subnet.
Description
August 2013 299