Avaya WLAN 8100 Series Reference page 259

Procedure
To display RSTP configuration details, use the following command from Privileged
EXEC mode.
show spanning-tree rstp {config | status | statistics}
Variable Definitions
config
status
statistics
Configuring MLT using CLI
The CLI commands detailed in this section allow for the creation and management of Multi-
Link trunks. Depending on the type of Multi-Link trunk being created or managed, the command
mode needed to execute these commands can differ.
Related topics:
Displaying MLT configuration and utilization
Configuring a Multi-Link trunk
Disabling a MLT
Displaying MLT properties
Configuring STP participation for MLTs
Displaying MLT configuration and utilization
About this task
Use the following procedure to display Multi-Link Trunking (MLT) configuration and
utilization.
Procedure
To display MLT configuration and utilization, use the following command from
Privileged EXEC mode.
show mlt [utilization <1-32>]
Configuring a Multi-Link trunk
About this task
Use the following procedure to configure a Multi-Link trunk (MLT).
Avaya WLAN 8100 CLI Reference
Variable
on page 259
on page 260
on page 260
Value
Displays RSTP bridge-level configuration.
Displays RSTP bridge-level role information.
Displays RSTP bridge-level statistics.
on page 259
on page 261
ACLI reference for wired networks
August 2013 259