Avaya WLAN 8100 Series Reference page 260

ACLI Reference for wired networks
Procedure
To configure a Multi-Link trunk, use the following command from Global Configuration
mode.
mlt <id> [name<trunkname>] [enable | disable] [member
<portlist>] [learning {disable | fast | normal}] [bpdu {all-
ports | single-port}] loadbalance {basic | advance}
id
name <trunkname>
enable | disable
member <portlist>
learning <disable | fast | normal>
bpdu {all-ports | single-port}
loadbalance {basic | advance}
Disabling a MLT
About this task
Use the following procedure to disable a Multi-Link trunk (MLT), clearing all the port
members.
Procedure
To disable a MLT, use the following command from Global Configuration mode.
no mlt [<id>]
Displaying MLT properties
About this task
Use the following procedure to display the properties of Multi-Link trunks (MLT) participating
in Spanning Tree Groups (STG).
260 Avaya WLAN 8100 CLI Reference
Variable Definitions
Variable
Comments? infodev@avaya.com
Value
Enter the trunk ID; the range is 1 to 32.
Specifies a text name for the trunk; enter up
to 16 alphanumeric characters.
Enables or disables the trunk.
Enter the ports that are members of the
trunk.
Sets STP learning mode.
Sets trunk to send and receive BPDUs on
either all ports or a single port.
Sets the MLT load-balancing mode:
• basic: MAC-based load-balancing
• advance: IP-based load-balancing
August 2013