Avaya WLAN 8100 Series Reference page 327

Configuring ports for an interface group
About this task
Use the following procedure to add ports to a defined interface group.
Note: The system automatically removes the port from an existing interface group to assign it
to a new interface group.
Procedure
Add ports by using the following command from Interface Configuration mode.
qos if-assign [port <portlist>] name [<WORD>]
Variable
port <portlist>
name <WORD>
Removing ports from an interface group
About this task
Use the following procedure to delete ports from a defined interface group.
Note: Ports not associated with an interface are considered QoS-disabled and may not have
QoS operations applied until assigned to an interface group.
Procedure
Delete ports by using the following command from Interface Configuration mode.
no qos if-assign [port <portlist>]
Creating an interface group
About this task
Use the following procedure to create interface groups.
Procedure
Create interface groups by using the following command from Global Configuration
mode.
qos if-group name <WORD> class <trusted | untrusted |
unrestricted>
Avaya WLAN 8100 CLI Reference
Variable Definitions
Specifies the ports to add to interface group.
Specifies name of interface group.
ACLI reference for wired networks
Value
August 2013 327