default snmp-server host command
The default snmp-server host command restores the-old style SNMP server and the
standards based tables are reset (cleared).
The syntax for the default snmp-server host command is:
default snmp-server host
The default snmp-server host command is executed in the Global Configuration
mode.
The default snmp-server host command has no parameters or variables.
snmp-server location command
The snmp-server location command configures the SNMP sysLocation value.
The syntax for the snmp-server location command is:
snmp-server location <text>
The snmp-server location command is executed in the Global Configuration mode.
The following table describes the parameters for this command.
Table 57: snmp-server location command parameters
text
no snmp-server location command
The no snmp-server location command clears the SNMP sysLocation value.
The syntax for the no snmp-server location command is:
no snmp-server location
The no snmp-server location command is executed in the Global Configuration
mode.
default snmp-server location command
The default snmp-server location command restores sysLocation to the default
value.
The syntax for the default snmp-server location command is:
default snmp-server location
The default snmp-server location command is executed in the Global Configuration
mode.
Avaya WLAN 8100 CLI Reference
Parameter
Description
Specify the SNMP sysLocation value; enter an
alphanumeric string of up to 255 characters.
ACLI reference for wired networks
August 2013
215