Avaya WLAN 8100 Series Reference page 21

3. Verify details of the configured capture profile(s) using the following commands.
4. Manage packet capture instances using the following commands.
Avaya WLAN 8100 CLI Reference
Configure the observer port.
WC8180(config-capture-profile)#observer-port ?
<1-65535> Enter a UDP port number
Configure the profile name.
WC8180(config-capture-profile)#profile-name ?
WORD Enter a name (1-32 characters)
Configure the snap length.
WC8180(config-capture-profile)#snap-length ?
<32-1024> Enter snap-length in bytes
Important:
In Wireshark, when the packet length exceeds the configured snap length in the
capture profile, the captured packets are displayed as Malformed. The default
value of the snap length is 128 and the value can be modified between 32 and
1024.
Adjust the snap length to prevent malformed packets.
For an overview of all configured capture profiles, use:
WC8180# show wireless capture-profile
To view details of a selected capture-profile, use:
WC8180# show wireless capture-profile <1-4> detail
A sample output is as follows:
WC8180(config-capture-profile)#show wireless capture-profile 1 detail
Capture Profile ID: 1
Name
Observer IP Address
Observer UDP Port
Filter Promiscous mode
Filter Interfaces
Filter Flow direction
Filter SSID
Filter Client MAC
Filter 802.11
Filter Duration
Filter SNAP Length
CLI Reference:
WC8180#wireless capture-instance ?
Packet capture instances
delete
restart
start
stop
Start packet capture instances:
WC8180# wireless capture-instance start ap <ap-mac> profile <profile-id>
ACLI reference for the Wireless LAN (WLAN) 8100
Delete capture instance
Restart capture instance
Start capture instance
Stop capture instance
: Default
:
: 37008
: Disabled
: All Radios
: Transmit and Receive
:
: 00:00:00:00:00:00
: data
: 300
: 128
August 2013 21