Configure Switch Management Ip Address - ZyXEL Communications XMG1915 Series User Manual

that port get sent to VLAN 2.
Figure 52 Initial Setup Network Example: Port VID
Go to the SWITCHING > VLAN > VLAN Setup > VLAN Port Setup screen.
1
Enter 2 in the PVID field for port 1 and click Apply to save your changes back to the run-time memory.
2
Settings in the run-time memory are lost when the Switch's power is turned off.

5.1.3 Configure Switch Management IP Address

If the Switch fails to obtain an IP address from a DHCP server, the Switch will use 192.168.1.1 as the
management IP address. You can configure another IP address in a different subnet for management
purposes. The following figure shows an example.
Chapter 5 Initial Setup Example
XMG1915 Series User's Guide
80