6.4 Time Setting
Use this screen to configure the time settings of the Switch. Click System > Time
Setting in the navigation panel to display the screen as shown.
Figure 21 System > Time Setting
The following table describes the labels in this screen.
Table 6 System > Time Setting
LABEL
SNTP
Time Server IP
Address
Time
(hh:mm:ss)
Date (yyyy-
mm-dd)
Time Zone
Apply
6.5 IP Setting Screen
Use the IP Setting screen to configure the Switch IP address and the default
gateway device. The gateway field specifies the IP address of the gateway (next
hop) for outgoing traffic.
The Switch needs an IP address for it to be managed over the network. The
factory default IP address is 192.168.1.1. The subnet mask specifies the network
number portion of an IP address. The factory default subnet mask is
255.255.255.0.
GS1500-24P User's Guide
DESCRIPTION
Select Enable to use Simple Network Time Protocol (SNTP) or Disable
to set the time manually.
If SNTP is enabled, enter the IP address of the time server you will use.
Click Apply to save your changes to the Switch and to update the time.
Enter the new time in hour, minute and second format.
Enter the new date in year, month and day format.
Select the time difference between UTC (Universal Time Coordinated,
formerly known as GMT, Greenwich Mean Time) and your time zone from
the drop-down list box.
Click Apply to save your changes to the Switch.
Chapter 6 System
53