Editing A Filter - HP auroraTempo User Manual

Q922
Frames
SVC Frames
LMI Frames
DATA Frames Include or exclude data frames.
DATA Length Choose this option to truncate data to a
Hex Data
• Press the LEFT arrow key to save your selections and
return to the Filter operation menu.

Editing a Filter

• Choose Edit from the Filter operation menu to edit an
existing filter. This option is only available if a filter has
been previously specified. A list of filters is displayed.
• Choose the filter you wish to edit. The Filter Config
menu is displayed. These menu options are discussed
previously in Creating a New Filter - please refer to this
for further information.
• Press the LEFT arrow key to save your selections and
return to the Filter operation menu.
Issue 1a - 10/99
Frame Relay Testing - Section 4
Include or exclude Q922 frames - in
other words, messages relevant to frame
relay.
Include or exclude SVC traffic.
Include or exclude LMI traffic.
specified length (for example, if you set this
option to 20, only 20 bytes of a 4096 byte
frame will be stored). The DATA Length
sub-menu is displayed. Enter a value and
press ENTER to save and exit the sub-
menu. This number must be within the
given range or *CHECK RANGE* is
displayed.
Include or exclude hexadecimal data. This
option only applies to the display of traffic
files - it does not affect the way in which
they are stored.
5-97