HP auroraTempo User Manual page 122

aurora Tempo - User Guide
The PVC DLCI sub-menu is displayed.
2
Note
• If the LMI is not active you cannot add or delete a
PVC. If you choose the options Next DLCI and
Enter DCLI. an error message is displayed.
This sub-menu has the following options :
Next DLCI
Enter DLCI
Config
Purge DLCIs
5-42
Choose this option to add the next DLCI
in the range. The DLCI Management
window displays statistics for the new
DLCI. Note that this option is not
available if the Interface Type is set to
User to Net.
Choose this option to enter a new DLCI
value. Press the RIGHT arrow key to
display a sub-menu and enter a valid
DLCI value. This number must be
within the displayed range or *CHECK
RANGE* is displayed. Press ENTER to
save and exit. The DLCI Management
window displays statistics for the new
DLCI. Note that this option is not
available if the Interface Type is set to
User to Net.
Choose this option to display the PVC
Configuration menu. This lets you alter
the PVC parameters - please refer to
PVC Configuration in Section 1 of this
chapter for further information.
Choose this option to purge DLCIs.
You can purge PVCs and fixed DCLIs
that have been deleted, and SVCs that
have been disconnected.
423972