HP auroraTempo User Manual page 54

aurora Tempo - User Guide
Display
FAS
NFAS
BPV Rate
BPV Secs
CRC4 Rate
CRC4 Secs
FAS Rate
FAS Secs
• To display the SA BIT DECODE for the first interface,
press F1 Physical Next, then press F2 Start Sa
Decode.
Information is displayed for timeslot 0.
2
Note
If you are running a test on either of aurora
when you press F2 Start Sa Decode, performance may be
reduced.
4-6
Status Description
The Frame Alignment Signal currently being
received.
The Non Frame Alignment Signal currently
being received.
The bipolar violation error rate.
The number of seconds in which one or more
BPV errors have occurred.
The CRC4 error rate.
The number of seconds in which one or more
CRC4 errors have occurred.
The Frame Alignment Signal error rate.
The number of seconds in which one or more
FAS errors have occurred.
Tempo
's interfaces
423972