Applying A Local Loop - HP auroraTempo User Manual

aurora Tempo - User Guide
Indication This is the strength of the received signal.
Stopping the test
• Press F1 Stop Line-Rate (or press MENU and select
the Stop option). The Line Rate test ends.

Applying a Local Loop

When a local loop is applied, aurora
that it receives.
You can set up a Local Loop from the Physical Status
window. To do this:
• Press the function key labelled Local Loop (or press
MENU and select Local Loop from the menu). The
Local Loop Test window is displayed.
4-30
One of four ranges is displayed :
+2 dB to -7.5 dB
-7.5 dB to -15 dB
-15 dB to -22.5 dB
less than -22.5 dB
transmits any data
Tempo
423972