Specifying The Speed; Specifying Hardware Handshake; Choosing The Framing Type - HP auroraTempo User Manual

Specifying the Speed

You can specify the bit rate to use for these interfaces. For
V&X you can select from 56 to 2048 kilobits per second,
and for DDS you can select from 56 or 64 kilobits per
second.
• Choose Speed to display a sub-menu of bit rates
• Highlight the appropriate value and press ENTER to
save your selection and exit the sub-menu.

Specifying Hardware Handshake

You can set aurora
signals on the line in DTE mode before it proceeds to
send data :
• Highlight Handshake and press ENTER or the
RIGHT arrow key to toggle between a tick ( ) and
a cross ( ). When a tick is displayed aurora
looks for CTS signals before proceeding.

Choosing the Framing Type

aurora
these :
• Choose Framing to display a sub-menu of framing
types :
ESF
SF/D4
SLC96
Unframed
Issue 1a - 10/99
to look for CTS (Clear to Send)
Tempo
supports a range of framing types - to select one of
Tempo
Extended Frame Format
Superframe Format
Subscriber Line Concentrator
The line is unframed.
Tempo
Configuring aurora
Tempo
6-5