HP auroraTempo User Manual page 114

aurora Tempo - User Guide
Entering a file name
• Position the flashing cursor in the file name display
area - press F1 to move the cursor to the left, press
F6 to move the cursor to the right.
• Use the UP, DOWN, LEFT and RIGHT arrow keys
on the cursor pad to navigate through the character
set. The currently selected character is highlighted in
a box.
• Press ENTER to choose the currently highlighted
character. The character appears in the file name
display area. You can also enter digits directly using
the keypad.
• Repeat the above process until you have defined the
file name.
Tip
• To delete a character, position the flashing cursor
over the character you want to delete (using F1 and
F6) and press F4 Delete.
5-34 423972