Switching on aurora
+
•
On the aurora
HELP/STATUS key at the same time. When the
DRAM tests have started, release the keys.
The Manual Diagnostic Mode menu is displayed.
Starting to download the software
•
From the menu, choose Download a New System.
The message are you sure is displayed
•
Press the ENTER key.
The message Connecting to host is displayed.
•
Open a DOS box on the PC using the Start/
Programs menu.
•
At the DOS prompt, type cd \tempo, then press
ENTER.
•
Type download X, where X is the number of the
COM port that aurora
Downloading starts and progress indicators are
displayed on aurora
Finishing the download
•
When data has finished downloading, Press any
key to continue is displayed on the PC. Press any
key.
•
To close the DOS box, type exit.
•
To start the new software, switch aurora
on again.
Issue 1a - 10/99
Configuring aurora
Tempo
press the POWER key, and the
Tempo
is connected to.
Tempo
and the PC.
Tempo
Tempo
off and
Tempo
6-23