HP auroraTempo User Manual page 24

aurora Tempo - User Guide
Interface connectors & cables
RJ48S
Interface connectors & cables
Tx
Rx/MON
RJ45
MON. ONLY
Interface connectors & cables
Tx
Rx/MON
RJ48C
MON. ONLY
1-14
Transmit/Receive RJ48S connector,
used to connect aurora for
Tempo
simulation and monitoring.
Transmit BNC 75Ω connector, used to
connect aurora for simulation.
Tempo
Receive BNC 75Ω connector, used to
connect aurora Tempo for simulation and
monitoring.
Transmit/Receive RJ45 120Ω
connector, used to connect aurora
for simulation and monitoring.
Receive BNC 75Ω connector, used for
monitoring.
Transmit bantam connector - use this
to connect aurora for simulation
Tempo
functions.
Receive bantam connector - use this
to connect aurora for both
Tempo
simulation and monitor functions.
Transmit/Receive RJ48C connector -
use this to connect aurora
Tempo
simulation and monitor functions.
Receive bantam connector - use this
for monitor functions only.
Tempo
for both
423972