Specifying A Dlci Range For Pvcs; Setting Other Pvc Parameters - HP auroraTempo User Manual

aurora Tempo - User Guide
BiAnnex A
BiAnnex D
Bi Gang-of-4 Bidirectional, defined by the gang-0f-4

Specifying a DLCI Range for PVCs

You can define a range of DLCI values with upper and lower
limits for PVCs. This range is used when you automatically
add a PVC using the Next DLCI option (see Manipulating
PVCs & SVCs in Section 2 for further information).
Setting the minimum PVC DLCI
You can set the minimum DLCI value for a PVC from the
Link Configuration menu.
• Choose LMI Lower dlci to display a sub-menu.
• Enter a value in the given range - if the value is
outside this range *CHECK RANGE* is displayed.
Setting the maximum PVC DLCI
You can set the maximum DLCI value for a PVC from
the Link Configuration menu.
• Choose LMI Upper dlci to display a sub-menu.
• Enter a value in the given range - if the value is
outside this range *CHECK RANGE* is displayed.

Setting Other PVC Parameters

• Choose LMI Config from the Link Configuration
menu to display the following sub-menu.
5-6
Bidirectional Q.933 Annex A (ITU-T)
Bidirectional T1.617 (ANSI)
consortium
423972