Activating & Deactivating Remote Loops - HP auroraTempo User Manual

Activating & Deactivating Remote Loops
Activating a loop code
To start transmitting loop codes to establish a loop at the
receiving end :
• Press F1 Send Loop Activation to display a sub-menu
of loop codes. The loop codes displayed depend on the
type of framing (ESF or SF).
• Choose a loop code - your selection is displayed in the
Remote Loop Test window.
• Press F5 Stop Sending Loop Code to stop the
transmission of loop codes (note the function key
displays a different option after selection).
The Remote Loop Test window displays Loop
Established if the loop has been successfully established
at the receiving end, otherwise Loop Not Established is
shown.
2
Note
If aurora
currently in the Remote Loop Test window, it displays
the following window when it receives a loop code:
Issue 1a - 10/99
is acting as the receiving end, and it is not
Tempo
Physical Testing
4-25