Manipulating Pvcs & Svcs; Adding & Deleting Pvcs - HP auroraTempo User Manual

2
Notes
• Not Present is displayed where no information is
available for a field.
• For a list of cause codes, please refer to Appendix 2.
Manipulating PVCs & SVCs
You must allocate a DLCI to each PVC or SVC you want to
use. Using the DLCI Management menu you can add, delete,
activate, deactivate and purge PVCs and connect, disconnect
and purge SVCs. This menu also lets you add and delete fixed
DLCI values. To access this menu :
• Press the MENU key when the DLCI Management
window is displayed :
2
Note
Some menu options may not be available, depending on
the Circuit Type you have chosen (SVC, PVC or both) -
refer to Choosing the Circuit Type in Section 1 for
further information.
Adding & Deleting PVCs
Adding a PVC
• Choose the Add PVC option on the DLCI
Management menu to add an active DLCI to the
interface.
Issue 1a - 10/99
Frame Relay Testing - Section 2
5-41