HP auroraTempo User Manual page 25

Interface connectors & cables
V/X Interface
Extension cable
Multi - adapter
cables
Connector safety
The connectors on your aurora
to EN60950 safety status classification. Connection with
other equipment should be made such that the equipment
continues to comply with clause 2.3 of EN60950 for SELV
circuits and clause 6 of EN60950 for TNV-1 circuits, as
appropriate to the connection being made.
Issue 1a - 10/99
Introducing aurora
Use this to connect aurora
Tempo
and X series interfaces. Also supplied
are two types of V-series cables - an
extension cable and various
multi-adapter cables.
This long cable can be plugged into
the back of aurora and the other
Tempo
end connected to the multi-adapter
cable.
These short cables either connect
directly to aurora Tempo or to the
extension cable. The sockets at the
other end let you connect to a wide
range of different V and X series
ports - RS232, RS449, EIA530, V.35
and X.21.
are designed to conform
Tempo
Tempo
at the V
1-15