HP auroraTempo User Manual page 150

aurora Tempo - User Guide
Transit Delay
If the frame load, as set by the frame rate and frame length,
exceeds maximum line rate of the interface you are testing a
warning is displayed.
For the test to continue you must reduce either the frame
size or frame rate.
To reduce the frame rate and maintain the frame length
press F1 Reduce Frm Rate.
To reduce the frame length and maintain the frame rate
press F6 Reduce Frm Length.
5-70
This is the length of time taken for the
frame to traverse the network.
Average, maximum and minimum
values are displayed, expressed in
milliseconds. Press the 5 key to view
or disable the transit delay display.
Note that this calculation can only be
performed when the remote end is
looped back, such that test packets
sent by aurora are returned back to
Tempo
it.
423972