Section 1 - Setting Up The Link - HP auroraTempo User Manual

This section describes how to set up aurora
relay testing on the selected interface. It tells you how to set
the DLCI address length, the interface and circuit types and
how to configure SVCs and PVCs. It also details how to set
minimum and maximum SVC and PVC DLCI values.
Accessing Link Configuration
• After selecting an interface and the Frame Relay
application, choose Link Config from the Interface
menu. The Link Configuration menu is displayed :
Tip
You can display Frame Relay status information from
any window. For details on how to do this please refer to
Chapter 3 - Displaying Status Information. In addition,
you can also view Frame Relay link parameters - please
refer to Displaying Frame Relay Settings in Chapter 6 for
further information.
Issue 1a - 10/99
Frame Relay Testing - Section 1
Setting up the Link
for frame
Tempo
5-3