The options are as follows :
n391
•
Highlight n391 and press the RIGHT arrow key to
display a sub-menu. Enter a number of events in the
range 1 to 255 - if the value is outside this range
*CHECK RANGE* is displayed.
n392
•
Highlight n392 and press the RIGHT arrow key to
display a sub-menu. Enter a number of events in the
range 1 to 10 - if the value is outside this range
*CHECK RANGE* is displayed.
n393
•
Highlight n393 and press the RIGHT arrow key to
display a sub-menu. Enter a number of events in the
range 1 to 10 - if the value is outside this range
*CHECK RANGE* is displayed.
t391
•
Highlight t391 and press the RIGHT arrow key to
display a sub-menu. Enter a number of seconds in
the range 5 to 30 - if the value is outside this range
*CHECK RANGE* is displayed.
t392
•
Highlight t392 and press the RIGHT arrow key to
display a sub-menu. Enter a number of seconds in
the range 5 to 30 - if the value is outside this range
*CHECK RANGE* is displayed.
Async. PVC enabled
•
Highlight Async. PVC enabled and press the RIGHT
arrow key to toggle between a tick ( ) or a cross ( ).
When a tick is displayed the asynchronous PVC
STATUS request is enabled.
Issue 1a - 10/99
Frame Relay Testing - Section 1
(full status polling cycles)
(error threshold)
(monitored events count)
(link integrity timer)
(polling timer value)
5-7