Physical Status Information - HP auroraTempo User Manual

To display status information :
• Press the STATUS key from within any window. The
Physical Status window is displayed.
You can now toggle between the different types of status
windows using the function keys. If the status information
spans more than one page, use the More function key to
scroll through the pages. The following describes what each
window shows.
2
Note
The status windows only display information and cannot
be edited (except for letting you reset the counters).

Physical Status Information

The Physical Status window displays information about the
physical ports and the line under test. Use the More function
key to navigate through any additional pages of status
information. This window is fully described in
Understanding the Status Display in Chapter 4 - please refer
to this for further information.
If nothing is assigned to the interface Interface Not
Assigned is displayed.
2
Note
You can reset the counters and status highlighting in this
window even when this interface is assigned to another
application using the Reset Statistics and Reset History
function keys.
Issue 1a - 10/99
Getting Started
3-11