aurora
Tempo
- User Guide
•
Press the RIGHT arrow key to display the Frame
Count sub-menu.
•
Use the number keys to input the frame count. This
value must be within the given range or *CHECK
RANGE* is displayed. The default frame count is 0.
•
Press ENTER to save and exit the Frame Count sub-
menu. The frame-count entered is now displayed in the
Setup Test Config window.
Displaying Transit Delay Timestamps
Timestamps are used to calculate the transit delay - this is the
length of time taken for the frame to traverse the network.
To display transit delay information in the test results:
•
Highlight Timestamp in the Frame Receive Test
Config menu.
•
Press either ENTER or the RIGHT arrow key to
toggle between a tick (
tick is selected transit delay timestamps are
displayed in the test results and the Setup Test
Config window displays Yes in the Timestamp
field.
Starting the test
•
Choose Start Test from the Frame Receive Test
Config menu. The test begins and the test results
are displayed in the Test Results/Status window.
This display is as follows :
Rx
Unknown
Lost
5-72
)
and a cross ( ). When a
This is the number of frames
received during the test.
This is the number of unrecognised
frames received during the test.
This is the number of frames lost
during the test (gaps in the load
received represent the lost frames).
423972