HP auroraTempo User Manual page 146

aurora Tempo - User Guide
The settings of the previous test run on this DLCI are
displayed or, if you have not performed a test on this
DLCI, the values are set to default values.
Tip
• To set the user-defined header to be the same as the
default setting, press F1 Preset User Header from
the User Defined Header window.
• Enter the DLCI, using the number keys, or the UP and
DOWN arrow keys to increase or decrease the value.
DLCi Data Link Connection
Field description
2
Notes
If you enter a DLCI outside the range allowed you cannot
move the cursor to another field.
If you enter a DCLI that is already being used, a warning is
displayed.
5-66
C/R Command Response Bit
EA0, EA1 Address Extension Bit
FECN Forward Explicit Congestion Notification
BECN Backward Congestion Notification
DE Discard Eligibility Indicator
Address Field:
shaded area DLCI
unshaded area items above
423972