Setting Other Svc Parameters; Bearer Capability - HP auroraTempo User Manual

Setting the maximum SVC DLCI
You can set the maximum DLCI value for an SVC from the
Link Configuration menu.
• Choose SVC Upper dlci to display a sub-menu.
• Enter a value in the given range - if the value is outside
this range *CHECK RANGE* is displayed.

Setting Other SVC Parameters

• Choose SVC Config from the Link Configuration
menu to display a sub-menu of SVC parameters.
2
Notes
• Some parameters are protocol dependant -
aurora
selected protocol.
• Mandatory options are indicated on the menu with
an 'M'. Mandatory options depend on the protocol
selected and the interface type (either network or
user).
• For a full description of the information elements
mentioned in this section, please refer to ITU-T
Recommendation Q.933.
The options are as follows :

Bearer Capability

This field is mandatory and therefore always present.
Issue 1a - 10/99
Frame Relay Testing - Section 1
only displays those that are valid for the
Tempo
5-9