Decode Filters
•
Choose Decode Filter from the Decode Options
menu to display the Filter operation menu:
Logger and decode filters are applied, created and edited in
the same way:
Applying an Existing Filter
•
Choose Apply from the Filter operation menu to
display a sub-menu listing the filters.
•
Use the UP and DOWN arrow keys to highlight the
filter you wish to apply.
•
Press ENTER to save the selection and exit the sub-
menu.
2
Note
Choose No Fltr. (the default) to remove filter parameters and
apply factory default settings.
Issue 1a - 10/99
Frame Relay Testing - Section 4
5-93