Using A Filter; Logger Filters - HP auroraTempo User Manual

aurora Tempo - User Guide
Changing the decode format
• Choose Decode Mode from the Decode Options
menu to display a sub-menu of decode types.
• Use the UP and DOWN arrow keys to highlight the
desired decode type and press ENTER to save and exit
the sub-menu.
The two types of decode available are :
Summary
Full

Using a Filter

Filters let you isolate the data you are interested in from the
display or from the captured file.
You can apply two types of filter - a Logger filter and a
Decode filter. If you apply a Logger filter and a message
does not fit the conditions of the filter it is discarded and not
displayed or saved in the log file. If a Decode filter has been
applied the messages are then passed through this filter. Only
messages that fit the conditions of the Decode filter are
displayed in the traffic window.
aurora
lets you define multiple filters of your own.

Logger Filters

• Choose Log Filter from the Logging Options menu
to display the Filter operation menu:
5-92
Choose this option to display data in
summarized decode format. This is the
default.
Choose this option to display data in
full decode format.
provides a preconfigured filter, the default, and
Tempo
423972