HP auroraTempo User Manual page 131

Inputting a file name
• Highlight Log to File and press ENTER or the RIGHT
arrow key to toggle this option to display a tick ( ).
When a tick is displayed aurora
following screen to let you input a file name :
Use this window to input a file name of up to 8 characters in length.
• Position the flashing cursor in the file name display
area. Press F1 to move the cursor to the left; press
F6 to move the cursor to the right.
• Use the UP, DOWN, LEFT and RIGHT arrow keys
on the cursor pad to navigate through the character
set.
• Press ENTER to choose the currently highlighted
character. The character appears in the file name
display area. You can also enter digits directly using
the keypad.
• Repeat the above process until you have entered the
file name.
Tips
• To delete a character, position the flashing cursor over
the character you want to delete in the file name
display (using F1 and F6) and press F4 Delete.
Issue 1a - 10/99
Frame Relay Testing - Section 2
displays the
Tempo
5-51