Resetting the Counters
aurora
interface is assigned. To reset the statistical counters back to
zero :
•
Press MENU to display the Physical status menu.
•
Choose the Reset Stats option. The counters are reset
to zero.
Status at a Glance!
aurora
since the counters were last reset. A highlighted box is placed
around what has changed (and the red L1 HIST LED lights
up for the T1, E1 and DDS interfaces).
For example, if an RCL (Loss of signal) alarm occurs after
resetting the counters the following is shown :
Removing the highlighting
•
Choose the Reset History function key. Any
highlighting disappears.
Issue 1a - 10/99
Tempo
starts maintaining the counters as soon as the
shows you at a glance if anything has changed
Tempo
Physical Testing
4-11