Displaying Frame Relay Settings; Saving A Configuration File - HP auroraTempo User Manual

Displaying Frame Relay Settings

You can view the Frame Relay parameters from the
Configure Physical Interface window.
• Press the View Frame Relay function key. A
Configuration window is displayed :
In addition to displaying the interface type, this window also
shows the current DLCI address length, circuit type, SVC
and PVC settings. Please refer to Setting up the Link in
Chapter 5 for further information.

Saving a Configuration File

You can save your Interface or System Configuration settings
in files stored in aurora
files can then be quickly retrieved and applied at a later stage.
• Choose the Save Config function key. A window is
displayed which lets you enter a configuration file
name of up to 8 characters in length.
Issue 1a - 10/99
Configuring aurora
's memory. These configuration
Tempo
Tempo
6-15