Sending Data To Aurora Expert For Windows; Saving To File - HP auroraTempo User Manual

Sending Data to aurora
2
Notes
Before you start to send data you must make sure that
Remote Control is disabled on aurora
You cannot send data to the serial port when you are
controlling aurora
To analyse data from aurora
Windows version 1.30 or later installed on your PC, and
version 2.8 or later software installed on aurora
• Connect aurora
• Make sure that the serial ports on aurora
PC are configured correctly.
For information on how to set up aurora
port see Setting up the Serial Port in Chapter 6.
• Start aurora
• In aurora
and choose Protocol.
• From the Protocol list, choose Frame Relay and choose
OK.
• On aurora
A sub-menu is displayed.
• Choose PC Expert to send to the PC.

Saving to File

• Choose Log to File to store captured information in
aurora
you enter a file name of up to 8 characters in length :
Issue 1a - 10/99
Frame Relay Testing - Section 2
Expert
for Windows
Tempo
with Remote Control.
Tempo
you must have aurora
Tempo
to your PC using the serial ports.
Tempo
Expert for Windows on your PC.
for Windows, display the Setup menu
Expert
Tempo , choose Log to Serial.
's memory. A window is displayed which lets
Tempo
.
for
Expert
Tempo .
and your
Tempo
Tempo 's serial
5-33