Packet Binary Parameters
Use this option to add packet layer binary parameters to the
Call Setup message.
•
Highlight Packet Binary Params in the SVC
Configuration menu and press the RIGHT arrow
key to toggle between a tick ( ) and a cross ( ).
When a tick is displayed the information element is
added to the Call Setup message.
Link Layer Core
Use this option to add a link layer core parameters
information element to the Call Setup message.
•
Choose Link Layer Core from the SVC
Configuration menu to display a sub-menu of
further options :
•
Highlight each option and press the RIGHT arrow
key to display a sub-menu. Enter a value in the
given range. The options are shown below :
Issue 1a - 10/99
Frame Relay Testing - Section 1
5-13