HP auroraTempo User Manual page 91

• To alter the current setting of Location highlight it and
press the RIGHT arrow key to display a sub-menu.
Choose from the following options :
CCITT Prv net to Loc User
Reserved Pub net to Loc User
Pub net to Rem User
National Prv net to Rem User
No info available Net Specific
2
Note
The options available depend on the Interface type you have
chosen.
• To alter the current setting of the coding standard
highlight Coding Standard and press the RIGHT
arrow key to display a sub-menu. Choose from the
following options :
• To alter the current setting of the description highlight
Progress and press the RIGHT arrow key to display a
sub-menu. Choose from the following options :
CCITT Not end to end ISDN
Dest Addr non ISDN Reserved
Orig Addr non ISDN
National Call Rtnd to ISDN
Net Specific
Inband info ISDN
Issue 1a - 10/99
Frame Relay Testing - Section 1
Coding Standards Location
CCITT coding standards
Private network to local user
Reserved for other international
Public network to local user
standards
Public network to remote user
National coding standards
Private network to remote user
Network specific coding
No information is available
Coding Standards Description
CCITT coding standards
Call is not end to end ISDN
Reserved for other international
Destination address is non ISDN
standards
Origination address is non ISDN
National coding standards
Call has been returned to the
ISDN
Network specific coding
In-band information or
appropriate pattern now
available
5-11