HP auroraTempo User Manual page 55

Multiframe containing
8 frames
Sa7 History
Display Status Description
FAS
NFAS
Sa5 and Sa6 History
Sa7 History
To stop collecting status information:
• Press F2 Stop Sa Decode.
If the other interface is assigned, to display the SA BIT
DECODE for that interface:
• Press F1 Physical Next
Decode.
Issue 1a - 10/99
Sa5 and Sa6 History
The Frame Alignment Signal currently being
received.
The Non Frame Alignment Signal currently
being received.
The last 4 state changes of the multiframe, with
timestamps
Timestamp when Sa7 was last pulsed to 0
Physical Next, then press F2 Start Sa
Physical Next Physical Next
Physical Next
Physical Testing
4-7