Setting Up A Calling Party Sub-Address - HP auroraTempo User Manual

aurora Tempo - User Guide
Inputting a CPN value
• Position the flashing cursor in the CPN value
display area. Press F1 to move the cursor to the left;
press F6 to move the cursor to the right.
• Use the UP, DOWN, LEFT and RIGHT arrow keys
on the cursor pad to navigate through the character
set.
• Press ENTER to choose the currently highlighted
character. The character appears in the CPN value
display area. You can also enter digits directly using
the keypad.
• Repeat the above process until you have defined the
CPN.
Tips
• To delete a character, position the flashing cursor
over the character you want to delete (using F1 and
F6) and press F4 Delete.
• To view the CPN you have defined on its own, press
F5 View. Press F5 again to return to the previous
menu.
Exiting from the CPN window :
• To exit and save your changes, press F2 Save &
Exit.
• To exit without making changes, press F3 Exit.

Setting up a Calling Party Sub-address

You can define a Calling Party Number sub-address :
• Highlight Calling Party Subaddress on the SVC
Configuration menu and press the RIGHT arrow
key to toggle between a tick ( ) or a cross ( ).
When a tick is selected the Calling Party Sub-Addr
menu is displayed.
5-18 423972