Connecting The Router To Power; Connecting Ac Power Cords To The Acx2200 Router - Juniper ACX2200 Hardware Manual

CHAPTER 17

Connecting the Router to Power

Connecting AC Power Cords to the ACX2200 Router

Copyright © 2017, Juniper Networks, Inc.
Connecting AC Power Cords to the ACX2200 Router on page 75
Connecting DC Power Cables to the ACX2200 Router on page 76
To connect AC power to the router, you need the following tools:
ESD grounding wrist strap
AC power cords
To connect AC power cords to the router:
Locate the power cords, which should have a plug appropriate for your geographical
1.
location. See the "ACX2200 AC Power Specifications" on page
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
2.
the strap to one of the ESD points on the chassis.
Insert the appliance coupler end of the power cord into the appliance inlet on the
3.
power supply.
Insert the power cord plug into an external AC power source receptacle.
4.
NOTE: Each power supply must be connected to a dedicated AC power
feed and a dedicated customer site circuit breaker. We recommend that
you use a dedicated customer site circuit breaker rated for 2 A (100 VAC)
or 1 A (240 VAC), or as required by local code.
Dress the power cord appropriately. Verify that the power cord does not block the air
5.
exhaust and access to router components, or drape where people could trip on it.
43.
75