Connecting Ac Power Cords To The Acx1100 Router - Juniper ACX1000 Hardware Manual

functioning normally, the system LED lights green steadily. If the status LED indicates that the
power supply is not functioning normally, repeat the installation and cabling procedures.
Figure 23: Connecting DC Power to the Router
SEE ALSO
ACX1000 and ACX1100 Power Overview | 60
Installing and Connecting an ACX1000 or ACX1100 Router Overview | 93
ACX1000 and ACX1100 DC Power Specifications | 63

Connecting AC Power Cords to the ACX1100 Router

To connect AC power to the router, you need the following tools:
• ESD grounding wrist strap
• AC power cords
To connect AC power to the router:
1. Locate the power cords, which should have a plug appropriate for your geographical location. See the
"ACX1100 AC Power Cord Specifications" on page
2. Attach an ESD grounding strap to your bare wrist, and connect the other end of the strap to an ESD
grounding point.
3. Insert the appliance coupler end of the power cord into the appliance inlet on the power supply.
4. Insert the power cord plug into an external AC power source receptacle.
61.
105