Connecting Ac Power Cords To The Acx2100 Router - Juniper ACX2000 Hardware Manual

Figure 22: Connecting DC Power to the Router
SEE ALSO
ACX2000 and ACX2100 Power Overview | 62
Installing and Connecting an ACX2000 or ACX2100 Router Overview | 93
ACX2000 and ACX2100 DC Power Specifications | 65

Connecting AC Power Cords to the ACX2100 Router

To connect AC power to the router, you need the following tools:
ESD grounding wrist strap
AC power cords
To connect AC power to the router:
1. Locate the power cords, which should have a plug appropriate for your geographical location. See the
"ACX2100 AC Power Cord Specifications" on page
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to an ESD point.
3. Insert the appliance coupler end of the power cord into the appliance inlet on the power supply.
4. Insert the power cord plug into an external AC power source receptacle.
NOTE: Each power supply must be connected to a dedicated AC power feed and a dedicated
customer site circuit breaker. We recommend that you use a dedicated customer site circuit
breaker rated for 2 A (100 VAC) or 1 A (240 VAC), or as required by local code.
63.
104