Connecting Ac Power Cords To The Acx1100 Router; Figure 23: Connecting Dc Power To The Router - Juniper acx1000 User Manual

Related
Documentation

Connecting AC Power Cords to the ACX1100 Router

Copyright © 2017, Juniper Networks, Inc.

Figure 23: Connecting DC Power to the Router

ACX1000 and ACX1100 Power Overview on page 41
Installing and Connecting an ACX1000 or ACX1100 Router Overview on page 97
Connecting the ACX1000 or ACX1100 Router to Earth Ground on page 103
ACX1000 and ACX1100 DC Power Specifications on page 61
To connect AC power to the router, you need the following tools:
ESD grounding wrist strap
AC power cords
To connect AC power to the router:
Locate the power cords, which should have a plug appropriate for your geographical
1.
location. See the "ACX1100 AC Power Cord Specifications" on page
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
Insert the appliance coupler end of the power cord into the appliance inlet on the
3.
power supply.
Insert the power cord plug into an external AC power source receptacle.
4.
NOTE: Each power supply must be connected to a dedicated AC power
feed and a dedicated customer site circuit breaker. We recommend that
you use a dedicated customer site circuit breaker rated for 2 A (100 VAC)
or 1 A (240 VAC), or as required by local code.
Dress the power cord appropriately. Verify that the power cord does not block the air
5.
exhaust and access to router components, or drape where people could trip on it.
Chapter 12: Connecting the Router to Power
59.
107