Ip Ssh Server Vrf - Dell S6100 Configuration Manual

ip ssh server vrf

Configure an SSH server on either a specific VRF or a management VRF.
Syntax
ip ssh server vrf {any | management | vrf-name}
To disable the SSH server configuration, use the no ip ssh server vrf {management | vrf-name}
command.
Parameters
any
vrf management
vrf vrf-name
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.4(0.0)
Usage Information
You can enable the SSH server on either a management VRF or a user defined VRF but not both. If no VRF is
specified, then the SSH server is enabled on the default VRF.
If the SSH server is enabled on a VRF with name vrf1, then use the following command to restart the SSH server
on a VRF with name vrf2: ip ssh server vrf vrf2. If the SSH server is enabled on a VRF with name vrf1,
then use the following command to restart the SSH server on the default VRF: ip ssh server vrf.
Example
•
•
•
•
•
•
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell Networking representative.
Enter the keyword any to enable access to the server from any VRF.
Enter the keyword vrf followed by the keyword management to configure an SSH
server on a management VRF.
Enter the keyword vrf followed by the VRF name to configure an SSH server on that
VRF.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S-Series and Z9000.
Dell(conf)# ip ssh server vrf any
Dell(conf)# no ip ssh server vrf
Dell(conf)# ip ssh server vrf vrf1
Dell(conf)# no ip ssh server vrf
Dell(conf)# ip ssh server vrf management
Dell(conf)# no ip ssh server vrf
Security 1451